Skip to content
Home/Answers/Getting started
CANADA TIRES / Getting started

Getting started: Before You Start Checklist

Getting started: Check temperature, tools, torque spec, TPMS and storage.

Updated 2026-11-20About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Getting started: Check temperature, tools, torque spec, TPMS and storage. Start depends on climate/storage/tools.

Why it matters

The swap is easy; the hard parts are timing, storage and hitting the correct torque. Get those wrong and blowouts and bent rims arrive early.

Climate.

Step by step

  1. Check whether the weekly average is below 7 C.
  2. Have a jack, stands and a torque wrench ready.
  3. Torque in a diagonal sequence, in stages.
  4. Reset TPMS and note where the set is stored.

Common mistakes

  • Waiting for the first snow.
  • Torquing by feel.
  • Working under a jack without stands.
  • Stacking tyres flat.

Checklist

  • Temperature, tools, torque, TPMS, storage.
  • Torque spec.
  • Stands.
  • Dry dark spot.

Who it is for

If this is your first Getting started, narrow by Climate. and Storage. first, then look at specific models.

Key facts

  • Climate.
  • Storage.
  • Tools.
Getting started: five questions at a glance
QuestionShort answer
Getting started: DIY, Shop or Store-at-ShopGetting started: Compare tool cost, time and storage across the three routes. Start depends on climate/storage/tools.
Getting started: What a Swap CostsGetting started: Convert labour, balancing, TPMS reset and storage into per-swap and yearly cost. Start depends on climate/storage/tools.
Getting started: Spending LessGetting started: Save by avoiding peak queues, owning tools and extending tyre life. Start depends on climate/storage/tools.
Getting started: Winter vs All-SeasonGetting started: Compare cold grip, wear rate and two-year total cost. Start depends on climate/storage/tools.

FAQ

Getting started: Before You Start Checklist

Getting started: Check temperature, tools, torque spec, TPMS and storage. Start depends on climate/storage/tools.

What should I check before buying a Getting started?

Start depends on climate/storage/tools. Key checks: Climate.; Storage..

Is a Getting started worth it?

Depends on use, budget and upkeep; a Getting started is not automatically better because it costs more.

Source: Transport Canada

Top picks

ProductBest forPrice
Torque WrenchTorqueLowSee buying guide
Jack and StandsJackMidSee buying guide
Tire RackRackLowSee buying guide

Sources